I can’t see a way to adjust the air mix on the Powerflamer 120 quick connect. There is a galvanized 3/8 pipe the attaches directly to the burner, but no air adjustment. Can you point to the air shutter for me?
For PF13xQN120 natural gas stove, there is no air/fuel mixing wheel. Individual jet burner on the burner ring mixes themselves. Do you have soot problem?
Yes, the burners produce a lot of soot on the bottom of the wok.
The jet burners (16 in total) burn cleanly if their holes are not blocked by spider web or things. So please check if all jet burner center holes plus their side holes (to let air in) are all not blocked by anything.
Then limit the pilot flame length to around 0.5”. If the pilot flame is allowed to be too long, it will not burn clean and produce soot. Let us know any update.
Thanks, I will try. The pilot flame is quite long at fully open. I’ll limit it and see if that helps.